Plastic Blow Molding Machine
Plastic Blow Molding Machine
Home > Products > Auxiliary Equipment

Auxiliary Equipment

Plastic Blow Molding Machine
Plastic Blow Molding Machine
Plastic Blow Molding Machine


Plastic Blow Molding Machine
Plastic Blow Molding MachinePlastic Blow Molding Machine
Plastic Blow Molding Machine

Plastic Blow Molding Machine
Plastic Blow Molding MachineFor granular material.
Plastic Blow Molding Machine
Plastic Blow Molding MachineLabor saving, Material saving, Low noise, Powerful suction.

 




Plastic Blow Molding Machine
Plastic Blow Molding MachinePlastic Blow Molding Machine

Plastic Blow Molding Machine

Plastic Blow Molding Machine
Plastic Blow Molding MachineDesigned for thoroughly drying the moisture contained in PVC material to ensure quality production.
Plastic Blow Molding Machine
Plastic Blow Molding MachineEven controlled temperature, Quick heating.

 




Plastic Blow Molding Machine
Plastic Blow Molding Machine
Plastic Blow Molding Machine

Plastic Blow Molding Machine
Plastic Blow Molding MachineWell suited for cooling down mold temperature and greatly increases efficiency.
Plastic Blow Molding Machine
Plastic Blow Molding MachineCompressor overload protector, Overcharging relay, High/low refrigerant pressure switch,
Plastic Blow Molding MachineTemperature switch, Cold prevention switch, Reverse current switch, Flow control switch, Refrigerant release valve.

 




Plastic Blow Molding Machine
Plastic Blow Molding Machine
Plastic Blow Molding Machine

Plastic Blow Molding Machine
Plastic Blow Molding MachineFor lowering oil temperature, for collecting and re-using the cooling water from the chiller.

 




Plastic Blow Molding Machine
Plastic Blow Molding Machine
Plastic Blow Molding Machine

Plastic Blow Molding Machine
Plastic Blow Molding MachineThis air compressor provides the air source for blow molding.




Plastic Blow Molding Machine
Plastic Blow Molding MachinePlastic Blow Molding Machine

Plastic Blow Molding Machine

Plastic Blow Molding Machine
Plastic Blow Molding MachineProduct outfeed for extending the cooling time.
Plastic Blow Molding Machine
Plastic Blow Molding MachineA. This unit advances efficiency and reduces labour cost.
Plastic Blow Molding MachineB. Compact construction, easy movability.
Plastic Blow Molding MachineC. Running speed could be adjusted at the range of 0-3 minutes.
Plastic Blow Molding MachineD. The unit may be set for continuous or intermittent running.
Plastic Blow Molding MachineE. Conveyor can adjusted vertically and tilted to the angle as desired.
Plastic Blow Molding MachineF. The conveyor belt features resistance to static electricity, heat and oil.

 




Plastic Blow Molding Machine
Plastic Blow Molding MachinePlastic Blow Molding Machine
Plastic Blow Molding Machine

Plastic Blow Molding Machine
Plastic Blow Molding MachineThis powerful crusher is designed and engineered to crush PE, PP, PVC etc. and a wide range of
Plastic Blow Molding Machineother plastic materials for waste recovery and a lowering of production costs.
Plastic Blow Molding Machine
Plastic Blow Molding MachineA. Designed with removable screen for easy material cleaning and convenient color and cutter changing.
Plastic Blow Molding MachineB. Specially designed hollow cutter arbor for fast heat dissipation and low noise levels.
Plastic Blow Molding MachineC. Space saving design and easy movability.

 




Plastic Blow Molding Machine
Plastic Blow Molding Machine
Plastic Blow Molding Machine

Plastic Blow Molding Machine
Plastic Blow Molding MachineDesigned for color blending operations for a wide range of plastic materials.
Plastic Blow Molding Machine
Plastic Blow Molding MachineA. Direct motor drive provides a high level of mixing performance efficiency.
Plastic Blow Molding MachineB. Compact construction enables easy operation and cleaning.

 




Plastic Blow Molding Machine
Plastic Blow Molding MachinePlastic Blow Molding Machine
Plastic Blow Molding Machine

Plastic Blow Molding Machine
Plastic Blow Molding MachineA. Suitable for labelling on flat, square or irregularly shaped containers. This device can adhere two labels to
Plastic Blow Molding Machinethe containers simultaneously either on one or two sides.
Plastic Blow Molding MachineB. This machine can be equipped with a stamping device upon request.

 




Plastic Blow Molding Machine
Plastic Blow Molding MachinePlastic Blow Molding Machine
Plastic Blow Molding Machine

Plastic Blow Molding Machine
Plastic Blow Molding MachineThese models are suitable for leak testing bottles of various shapes.
Plastic Blow Molding Machine The height of the machine can be adjusted subject to the size of bottle.

 




Plastic Blow Molding Machine
Plastic Blow Molding Machine
Plastic Blow Molding Machine

Plastic Blow Molding Machine
Plastic Blow Molding MachineAutomatically controls mold temperature to give perfect molding with every shot.

 

 

No. 6, Aly. 26, Ln. 198, Minsheng Rd., Wufeng Dist., Taichung City 413, Taiwan map-icon
Tel:+(886) 4-23396828  Fax:+(886) 4-23394679
E-mail: parker@tcts.seed.net.tw / pk02@ms6.hinet.netPlastic Blow Molding Machine
Website:http://www.parker.com.tw http://www.blowmolding-machine.com.tw
Copyright © PARKER PLASTIC MACHINERY CO., LTD.
Hosted by Machinetools Directory (S & J Corp.), Plastic and Rubber Machine Directory.